FUTEK IPM52x (D520) Digital Display - Manual (Page 14)

13
• “CHAN1”, (Only if CHAN is not disabled from above),
is flashed with current selected number. Valid values 0-
15.
0 Don’t disable any channel 1
1 Skip input range selection "INPUT"
2 Skip user calibration branch "USER"
4 Skip input calibration branch "INPUT"
8 Skip shunt calibration branch "SHUNT"
• “CH” (Only if CHAN is not disabled from above) is
flashed with current selected number. Valid values 0-7.
0 Don’t skip Channel 2
1 Skip input range selection "INPUT"
2 Skip user calibration branch "USER"
4 Skip input calibration branch "INPUT"
• “CH3” (Only if CHAN is not disabled from above) is
flashed with current selected number. Valid values 0-1.
0 Don’t skip Channel 3
1 Skip Channel 3 "CHAN 3"
• “OUTPUT” (Only if OUTPUT is not disabled from
above) is flashed with current selected number. Valid
values 0-31.
0 Don’t disable any output menus
1 Disable Alarm 1 menu
2 Disable Alarm 2 menu
4 Disable Alarm 3 menu
8 Disable Alarm 4 menu
16 Disable the Source menu