Dwyer DevCom2000 User Manual
Page 25
DevCom2000 User Manual
MAN-1010 7/19/2010
Our Quality Management System is
Page 25
ISO 9001:2008 Certified
Step
Action
5
Make the change to the value, as required.
6
Click Set to accept the changes. Or press Cancel to cancel the
changes.
7
Click OK to close the dialog.
8
Click on the Send icon
to commit the changes to the device.
6.3.4
Executing Methods or Standard Operating Procedures
Methods are defined in the DD file for the device that DevCom2000 is connected to. You can select the Method
and execute it for calibrating the device, trouble shooting, etc. Method execution leads you through a number of
steps, like in a wizard.
A Few examples of methods include,
Setting high and low range calibration points
Calibration of the device
Run the advanced diagnostic test procedure
Execute tests to gather information on device operation.
To execute a Method, perform the following steps:
Step
Action
1
Ensure that the application is running and communications have
been established: