Dwyer DevCom2000 - Manual (Page 10)

DevCom2000 User Manual
MAN-1010 7/19/2010 Our Quality Management System is Page 10
ISO 9001:2008 Certified
company name, License ID, and User Codes.
3. Or, send a fax to ProComSol, Ltd (216.221.1554) containing
your company name, License ID, and User Codes.
The above information will be processed at ProComSol, Ltd and
an appropriate response will contain the required Reg Key
information that the user will need to enter.
If successful, the program continues as normal. You will not
need to perform the activation process again.
5 If the “Activate this software online” option is selected, the
following window appears.
Enter the information from the Activation label on the CD case.
Select Ok to process the information.
If the codes were successfully entered, the program will continue
as normal. You will not need to perform the activation process
again.
6 We have tried to make the Activation process as easy as
possible. Contact ProComSol, Ltd if you have any difficulties.
4.4
Connecting to the HART Network
The DevCom2000 application communicates with the HART Field Devices through a HART compatible
communication interface (e.g., a "HART Modem"). Using this communication interface you will transmit real-time
HART data between DevCom2000 and the connected HART compatible field device.
There are a wide variety of HART compatible interfaces. Please follow the manufacturer’s instruction for
connecting your interface to the PC. This manual uses the HART modem manufactured by ProComSol, Ltd, called
the HM-USB-ISO. It uses the USB interface.
Insert the USB connector on the HM-USB-ISO into your computer’s USB port. Using the clips on the wires from
the HART interface, connect to the device across the 4-20ma signal. If a suitable load resistance is not available, a
250Ω resistor must be placed in series with the device power supply.