Dwyer PFG2 - Manual

Bulletin P-PFG2
The Series PFG2 Process Filter Gage is designed for determining the state of an
in-line filter. The differential pressure indicator determines the pressure drop on
either side of a filter through its 1/8˝ female NPT pressure connections, and relates
the value to one of three zones: clean (green), change (yellow), or dirty (red). The
Series PFG2 is perfectly suited for filter applications, line loss, valve drop, and
many other differential pressure applications where a simple indicator is needed.
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
SPECIFICATIONS
Service: Liquids/gases compatible with SS, GFN, and fluoropolymer.
Wetted Materials: Aluminum, SS, glass filled nylon, and fluoropolymer.
Accuracy: ±5% F.S.
Maximum Temperature: 200°F (93°C).
Maximum Pressure: 300 psig (20.7 bar).
Materials:
Body: Glass filled nylon;
Mounting Block: Aluminum;
Lens: Polyester;
Elastomers: Fluorocarbon.
Process Connection: 1/8˝ female NPT.
Mounting Orientation: Any orientation with 10-32 threaded holes 3/4˝ apart.
Dimensions: 3.25˝ H x 3˝ W x 2.31˝ D.
Weight: 9.6 oz (272.2 g).
Specifications - Installation and Operating Instructions
Series PFG2 Process Filter Gage
MOUNTING
The Series PFG2 features two #10-32 UNF threaded holes in its mounting block
for easy mounting. The holes are 3/4˝ apart and located at the same level as the
end process connections. The direction of process flow is indicated on the dial,
with the arrow pointing to the low pressure port. In order to change the high and
low pressure connections, simply remove the indicator from the mounting base
and rotate 180°. Retighten the plastic bolts to 20 to 25˝ pounds of torque. By
removing the mounting block, the PFG2 can be directly mounted through the
outlet/inlet connections on the bottom of the unit.
MAINTENANCE
Upon final installation of the Series PFG2 Process Filter Gage, no routine
maintenance is required. A periodic check of system calibration is recommended.
The Series PFG2 is not field serviceable and should be returned if repair is
needed (field repair should not be attempted and may void warranty). Be sure to
include a brief description of the problem plus any relevant application notes.
Contact customer service to receive a return goods authorization number before
shipping.
PFG2 WITHOUT MOUNTING BASE
©Copyright 2010 Dwyer Instruments, Inc. Printed in U.S.A. 9/10 FR# R1-443837-00
C L E A N
C
H
A
N
G
E
D
I R T Y
HIGH PORT
1-1/8
[28.58]
3
[76.20]
3/4
[19.05]
2X #10-32 UNF
MOUNTING HOLES
LOW PORT
3/4
[19.08]
3/8 [9.37]
2-1/2
[63.50]
2-3/4
[69.85]
2-5/16
[58.74]
1-1/2
[38.10]
2X 1/8 NPT
CONNECTION
P-PFG2:TEMPLATE 9/20/10 7:57 AM Page 1