1 resetting to factory setting 56, Resetting to factory setting 56, Tory – West Control Solutions KS 42-1 User Manual
Page 56: Copy, 1 resetting to factory setting, Safety hints
12.1 Resetting to factory setting
In case of faultyconfiguration, KS4x-1 can be reset to the default condition.
1 For this, the operator must keep the keys increment and decrement pressed
during power-on.
2 Then, press key increment to select YES.
3 Confirm factory resetting with Enter and the copy procedure is started
(display
COPY).
4 Afterwards the device restarts.
In all other cases, no reset will occur (timeout abortion).
g
If one of the operating levels was blocked and the safety lock is open, reset to
factory setting is not possible.
g
If a pass number was defined (via BlueControl
®
) and the safety lock is open, but
no operating level was blocked, enter the correct pass number when prompted in
3. A wrong pass number aborts the reset action.
g
The copy procedure (
COPY) can take some seconds.
Now, the transmitter is in normal operation.
Safety hints
Resetting to factory setting
56
Operating KS4x-1
ÌÈ
+ Power on
1
SP.x
run
Ada
Err
torY
FAC
SP.x
run
Ada
Err
no
FAC
2
È
SP.x
run
Ada
Err
YES
FAC
SP.x
run
Ada
Err
COPY
FAC
Ù
3
4
SP.x
run
Ada
Err
8.8.8.8.
8.8.8.8.
1.
2.