West Control Solutions KS 42-1 - Manual (Page 27)

Configuration level
Operating KS4x-1 27 Configuration
Name Value range Description Default
SP.E
Switching to external setpoint SP.E 0
0 no function (switch-over via interface is possible)
1 active
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
Y2
Y/Y2 switching 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
6 Ò key
mAn
Automatic/manual switching 0
0 no function (switch-over via interface is possible)
1 always activated (manual station)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
6 Ò key
C.oFF
Switching off the controller 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
6 Ò key
m.Loc
Blockage of hand function 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
Err.r
Reset of all error list entries 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
6 Ò key
P.run
Programmer Run/Stop (see page 44) 0
0 no function (switch-over via interface is possible)
2 DI1
3 DI2 (only visible with OPTION)
4 DI3 (only visible with OPTION)
di.Fn
Function of digital inputs (valid for all inputs) 0
0 direct
1 inverse
2 toggle key function
fDI1 Forcing di1 (only visible with BlueControl!) 0
0 No forcing
1 Forcing via serial interface