Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 97)

Instruction Manual CyberScan DO5000
94
To download data stored in memory to a printer, access the View
Stored Data option in the setup screens. Access the desired data
point by sorting the data via one of the three sorting options. Touch
print on the screen displaying the data.
The following is a list of factory default settings for the CyberScan DO
5000 meter. You can reset your meter to the factory default settings
by accessing the Reset to Factory Default screen from the System
Setup screen.
Mode Screen
Default Setting
System Setup
Time 12 hour time mode
Date month/date/year
Print Configuration Baud Rate 19200
Parity None
Data Bits 8
Stop Bits 1
Operator ID none
Beeper Status ON
Display Contrast 15
DO Setup
Print Configuration All parameters ON
Data Configuration All parameters ON
Sample ID none
Print Interval manual
Display Resolution X.XX
Auto Read Mode OFF
Temperature Units Celsius
Stability Criteria Medium
Alarm Limits OFF
Alarm Limit Low 0
Alarm limit High 1500