Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 27)

Instruction Manual CyberScan DO5000
24
4.4.2 Set Number of Bits
enter
Current NUMBER OF BITS
Set Number of Bits
7
8
To Set Number of Bits
1. Access the Set number of Bits screen from the Set Print
Configuration screen. The current number of bits is displayed on
the screen.
2. Touch 7 or 8 to select the number of bits.
3. Touch enter to accept the bit value and return to the Set Print
Configuration screen.
OR
Touch exit to return to the Set Print Configuration screen, without
making any changes.