Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 21)

Instruction Manual CyberScan DO5000
18
This screen can be used to set the present time which will be
displayed on the measure screens. This time will also be printed on
demand and stored in the data storage center of the meter when data
is saved. There are two formats options for the time. The clock can
be set as either a 12 hour clock or a 24 hour clock.
To set time
1. Access the set time screen from the System Setup screen. The
current time and numeric keypad are displayed on the screen.
2. Touch clear to delete the current entry.
3. Touch the 24hr or 12hr button to format the clock as either a 12
hour or a 24 hour clock.
4. Touch
am or pm to set the appropriate time.
5. Use the numeric touch pad to enter desired time, separating the
hour and the minutes by touching the “:” key in the keypad.
6. Touch enter to accept the time in the current format.
OR
Touch exit to return to the System Setup screen, without making any
changes.
If you do not use the “ : ”, the meter will not accept the time.
Current 12HR
Current 24HR
5:15 pm
17:15