Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 61)

Instruction Manual CyberScan DO5000
58
This screen allows you to select what criteria are stored in the
meter’s memory with the measurement when you save the data.
Data is stored only if a Sample ID has been assigned. The status
of the current data storage criteria is displayed on the screen. The
criteria option is active if “ON” appears to the right on the screen. It is
inactive if “OFF” appears to the right of the option. All storage criteria
will be stored in the meter’s memory with the measurement.
However, only active items will appear on the View Stored Data
screens. Changing the status of the storage criteria to active from
inactive will allow the criteria to be displayed with the previously
stored data.
To Set Data Storage Criteria
1. Access the Set Data Storage Criteria screen from the DO/ BOD/
OUR/ SOUR Setup screen. Current criteria are displayed on the
screen.
2. Use the arrow keys to highlight the data storage criteria you
want to modify.
3. Touch ON or OFF to change the status of the criteria.
4. Repeat steps 2 and 3 with the remaining criteria.
5. Touch save to save the entire group of Data Storage Criteria and
return to the Setup screen.
OR
Touch exit to return to the Setup screen, without making any
changes.