Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 28)

Instruction Manual CyberScan DO5000
25
4.4.3 Set Stop Bits
enter
Current STOP BITS
Set Stop Bits
1
2
To Set Stop Bits
1. Access the Set Stop Bits screen from the Set Print Configuration
screen. The current number of bits is displayed on the screen.
2. Touch 1 or 2 to set the desired number of stop bits.
3. Touch enter to accept the stop bit value and return to the Set
Print Configuration screen.
OR
Touch exit to return to the Set Print Configuration screen, without
making any changes.