Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 12)

Instruction Manual CyberScan DO5000
9
3.3 Touch Screen Operation
The CyberScan DO 5000 meter operates with a state of art touch
screen. The touch screen makes this the easiest meter on the market
to operate and care for. When this meter is first plugged in, the
STANDBY screen will appear. Touch anywhere on this screen to
access the functions of the meter.
The buttons on the right side of the screen control all of the functions
of the meter. Alight touch on the screen is all you need to access the
various functions. Once you touch a button you will get an audible
tone; the screen will not change until you lift your finger.
This design prevents rapid uncontrolled scrolling through the various
function screens. Easy to understand prompts guide you through the
operation of the meter in the selected mode. If you are ever in doubt
about what to do, just touch help on the bottom right corner of the
screen for detailed information about the screen.
The touch screen is made of a durable polyester material that is
chemically resistant. Maintenance is simple with this meter. To clean
the screen you just need to wipe it with a damp cloth and dry it with a
clean dry towel. For additional information, see Cleaning and
Troubleshooting sections of the manual (page 92).