Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 63)

Instruction Manual CyberScan DO5000
60
Here you can set the display resolution on the screen. Choose high
for two decimal points in mg/L, and for one decimal point in % sat and
mbar. Choose low for one decimal point in mg/L and one unit
resolution in % sat and mbar.
To Set Display Resolution
1. Access the Set Display resolution screen from the DO/ BOD/
OUR/ SOUR Setup screen.
2. The current Display Resolution is displayed on the screen.
3. Touch high or low to select the desired resolution.
4. Touch enter to accept this choice and return to the Setup screen.
OR
Touch exit to return to the Setup screen, without making any
changes.