Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 43)

Instruction Manual CyberScan DO5000
40
Sequential ID# Assignment
1. Access the Set Sample ID# screen from the Setup screen.
2. Touch seq for sequential ID# assignment. The current ID# is
displayed on the screen.
3. Touch clear to delete the current ID#.
4. Use the alphanumeric keypad on the screen to enter the number
that you would like your sequential ID# assignment to begin with.
Every time you touch print on the measure screen, the ID# will
increase by 1. The BS key will allow you to backspace to remove
a character that was incorrectly entered.
5. Touch enter to accept the first sequential ID# and return to the
Setup screen.
OR
To deactivate the Sample ID# Assignment
1. Access the Set Sample ID# screen from the Setup screen.
2. Touch man for manual ID# entry. The current ID# is displayed on
the screen.
3. Touch clear to delete the current ID#.
4. Touch enter. The ID# assignment is now deactivated. No number
will be assigned to your samples. The meter will return to the
Setup screen.
OR
Touch exit to return to the Setup screen, without making any
changes.