Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 23)

Instruction Manual CyberScan DO5000
20
This screen allows you to turn on or off the beeper. You may choose
to have an audible signal when the meter recognises that the current
measurement is stable, each time a function button is touched and/
or when the set limits of a measurement mode have been exceeded.
To Set Beeper Status
1. Access the set beeper status screen from the System Setup
screen. The current beeper status is displayed on the screen.
2. Use the arrow keys to highlight the beeper status option that you
would like to modify.
3. Touch ON or OFF until the desired status is visible in the current
beeper status box.
4. Touch save to accept the changes and return to the System
Setup screen.
OR
Touch exit to return to the System.