Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 41)

Instruction Manual CyberScan DO5000
38
When this option is active, each time you touch print on the Measure
Screen the DO values along with date/time and the sample ID will be
sent to data storage. You can manually enter an alphanumeric
identification of up to 9 characters for any sample or you can have
the meter sequentially number your samples beginning at the number
of your choice. You may also choose to deactivate the sample ID.
To Set Sample ID
Manual ID Assignment
1. Access the Set Sample ID screen from the Setup screen.
2. Touch
auto or Man to choose the desired mode.
3. Touch enter to accept the choice and return to the setup screen.
4. Use the keypad to enter the new sample ID.
5. Touch enter to accept the first sequential ID# and return to the
Setup screen.