Thermo Fisher Scientific CyberScan DO 5000 - Manual (Page 69)

Instruction Manual CyberScan DO5000
66
If an operator ID is entered and no data points are stored with that
operator ID, you will see a message indicating the operator ID was
not found. Touch OK to return to the operator ID keypad and enter a
new operator ID.
Note:
Even if you do not know the appropriate information to access a
specific data point, you can access the stored data through any of the
sort options. Highlight the sort option of interest and touch enter to
access the sort screen. Touch enter again and the meter will place
you at a data point.
• The sample ID# sort option will place you at the first data point in
numeric order by sample ID#.
• The operator sort option will place you at the first data point of the
first operator ID in alphabetic order.
• The date sort option will place you at the most recent point on the
last date that data was stored.
Once you access the data storage center, you can touch prev and
next to scroll through the additional data points stored in memory.