beautypg.com

KROHNE ALTOFLUX 2W IFM 4042K EN User Manual

Page 4

background image

ALTOFLUX 2W

02/2001

4

6\VWHPGHVFULSWLRQ

ystem description

Electromagnetic 2-wire flowmeters with IFC 040 signal converter are precision instruments
designed for linear flow measurement of liquid products.

The process liquids need to be electrically conductive,

5 µS/cm

(for cold demineralized water

20 µS/cm).

Depending on the meter size, the full-scale range Q

100%

can be set between 85 Liter/h and 763 m

3

/h, equivalent to a flow velocity v = 0,3- 12 m/s,

see flow table in Section 5.1.

3URGXFWOLDELOLW\DQGZDUUDQW\

Electromagnetic 2-wire flowmeters with IFC 040 signal converter are designed solely for
measuring the volumetric flowrate of electrically conductive, liquid process products.

These flowmeters are also available for use in hazardous areas. Special codes and regulations
apply in this connection and these are referred to in the special ‘EEx’ notes.

Responsibility for suitability and intended use of these electromagnetic flowmeters rests solely
with the operator.

Improper installation and operation of the flowmeters (systems) may lead to loss of warranty.

In addition, the “General conditions of sale” forming the basis of the purchase contract are
applicable.

If flowmeters need to be returned to KROHNE, please note the information given on the last-but-
one page of these Instructions. KROHNE regret that they cannot repair or check your
flowmeter(s) unless accompanied by the completed form sheet.

&((0&6WDQGDUGV$SSURYDOV

Electromagnetic flowmeters with IFC 040 signal converter
meet the protection requirements of Directive 89/336/EEC in conjunction with
EN 50081-1 (1992) and EN 50082-2 (1995), and Directives 73/23/EEC and
93/68/EEC in conjunction with EN 61010-1, and also bear the CE symbol..

6RIWZDUHKLVWRU\

Display and control unit

PC user software

Hart

®

module

IFC 040

IFC 040

Software

Status

Software

Status

Software

Status

3.19019.xx00

current

3.19136.xx00

current

3.18748.xx00

current

ADC module

I/O module

Software

Status

Software

Status

3.19749.xx00

current

3.18748.xx00

current