KROHNE ALTOFLUX 2W IFM 4042K EN - Manual (Page 29)

Part B IFC 040 Signal converter Section 4.4
02/2001 ALTOFLUX 2W 29
Display texts Description and settings
FCt. 3.3
ZERO POINT
→
Calibrate the zero
Edit
not Sure
↑
YeS Sure
↵
Carry out only after a replacement of the electronic unit or if,
at low flow, an offset is presumed.
Please note!
•
Measuring tube must be completely filled with the
process liquid!
•
Flow must truly be “zero”!
8 XXX.X
Perc.
↵
Display of current flow rate as a percentage of the full-scale
range. (The segments of the “8” are reduced in keeping with
the progress of measurement.)
Edit
not Save
Yes Save
↵
Save new zero value?