KROHNE ALTOFLUX 2W IFM 4042K EN - Manual (Page 39)

Part C Technical data, Block diagram and Measuring principle Section 5.5
02/2001 ALTOFLUX 2W 39
5.5 Dimensions and weights
Flange connections to ... Dimensions in mm and (inch)
DIN 2501 DN 10- 150 PN 40, 16 see table
Ansi B 16.5
3 /
8
“- 6“ 150 lb/ RF
≥
300 lb/ RF
see table
dimensions supplied on request
• Dimension “a“ without flange gaskets (not necessary with Teflon
®
PTFE liner or PFA liner
• For meter size 3 /
8
“ a flange connection 1 /
2
" is necessary.
Meter size Dimensions in mm and (inch) approx. Weight in
kg (lb)
DIN ANSI a (fitting length) ø D
DN PN inch DIN ISO 13359 ANSI
b c
DIN, ISO ANSI
with DIN
flanges
with ANSI
flanges
10 40 3 /
8
150 (5.91) - 150 (5.91) 330 (12.99) 121 (4.76) 90 (3.54) 88.9 (3.50) 7.5 (17) 8.5 (19)
15 40 1 /
2
150 (5.91) 200 (7.87) 150 (5.91) 330 (12.99) 121 (4.76) 95 (3.74) 88.9 (3.50) 7.5 (17) 8.5 (19)
25 40 1 150 (5.91) 200 (7.87) 150 (5.91) 301 (11.85) 121 (4.76) 115 (4.53) 108 (4.25) 9.5 (21) 11 (25)
50 40 2 200 (7.87) 200 (7.87) 200 (7.87) 383 (15.08) 160 (6.30) 165 (6.50) 152 (6.00) 11 (25) 11 (25)
80 40 3 200 (7.87) 200 (7.87) 200 (7.87) 400 (15.75) 173 (6.81) 200 (7.87) 191 (7.50) 15 (33) 16 (36)
100 16 4 250 (9.84) 250 (9.84) 250 (9.84) 451 (17.76) 233 (9.17) 220 (8.66) 228 (8.98) 18 (40) 21 (46)*
150 16 6 300 (11.81) 300 (11.81) 300 (11.81) 492 (19.37) 257 (10.12) 285 (11.22) 279 (10.98) 25 (55) 21 (46)*
• max. process pressure rating acc. DIN flanges, see column “PN“
PN 40 = 580 psig and PN 16 = 232 psig
DN 10 – 40 / 3 /
8
“ - 1 1 /
2
" Tolerance details for fitting length
dimensions “a“
Standard
min ± 1mm / ± 0.04“
ISO DIN 13 359 +0 / -3 mm / +0 / -0.12“
DN 50 – 150 / 2“ – 6“