KROHNE BM 702 A EN - Manual (Page 35)

OPERATION
6
35
BM 702 A
www.krohne.com 09/2009 - 4000643301 - MA BM 702 A R01 en
Operation
6.1 Setting parameters via program PC-CAT 2 for Windows 5.0.0
With the program PC-CAT 2 for Windows, version 5.0.0.116 or higher, you can configurate the
devices in a very comfortable way from a PC. Connect the non-intrinsically safe side of the
isolation amplifier over a load between 250 Ω and 350 Ω to the HART
® adapter and connect it
with a serial port of the PC or a USB port.
The used isolation amplifier must be HART ® compatible.
1 PC
2 RS232 / USB
3 HART
® -Adapter
4 Load: ≥250 Ω
5 Isolation amplifier
.book Page 35 Thursday, September 3, 2009 2:53 PM