KROHNE BM 702 A EN - Manual (Page 15)

INSTALLATION
3
15
BM 702 A
www.krohne.com 09/2009 - 4000643301 - MA BM 702 A R01 en
3.3 Transport
3.4 Pre-installation requirements
• Make sure that there is adequate space on all sides.
• Protect the signal converter from direct sunlight and install the weather protection accessory
if necessary.
• Do not subject the signal converter to heavy vibrations. The devices are tested for vibration
and agree with EN 50178 and IEC 60068-2-6.
To make sure that you install the device quickly, easily and safely, prepare the installation as
given in the instructions that follow.
WARNING!
•
Depending on the version, the device will weight approx. 5...30 kg / 11...66 lbs. To carry, use
both hands to lift the device carefully by the converter housing. If necessary, lift the device
with a hoist.
• When handling the device, avoid hard blows, jolts, impact, etc. to prevent damage.
INFORMATION!
The following precautions must be taken to make sure it is correctly installed.
.book Page 15 Thursday, September 3, 2009 2:53 PM