KROHNE BM 702 A EN - Manual (Page 31)

ELECTRICAL CONNECTIONS
4
31
BM 702 A
www.krohne.com 09/2009 - 4000643301 - MA BM 702 A R01 en
4.3 Protection category
• Make sure that the gaskets are not damaged.
• Make sure that the electrical cables are not damaged.
• Make sure that the electrical cables agree with the national electrical code.
• The cables are in a loop in front of the device 1 so water does not go into the housing.
• Tighten the cable feedthroughs 2.
INFORMATION!
The device fulfills all requirements per protection class IP66/67 (equivalent to NEMA6-6X).
DANGER!
Make sure the cable gland is watertight.
Figure 4-5: How to make the installation agree with protection category IP67
.book Page 31 Thursday, September 3, 2009 2:53 PM