beautypg.com

Installation, 8 how to install the device on the tank – KROHNE BM 702 A EN User Manual

Page 25

background image

INSTALLATION

3

25

BM 702 A

www.krohne.com

09/2009 - 4000643301 - MA BM 702 A R01 en

3.8 How to install the device on the tank

3.8.1 How to install a device with a flange connection

Equipment needed:

• Device
• Gasket (not supplied)

• Make sure the flange on the nozzle is level.
• Make sure that you use the applicable gasket for the flange dimensions and the process.
• Align the gasket correctly on the flange facing of the nozzle.
• Lower the antenna carefully into the tank.
• Tighten the flange bolts.

i

Refer to local rules and regulations for the correct torque to apply to the bolts.

Requirements for flange connections

Figure 3-12: Flange connection

.book Page 25 Thursday, September 3, 2009 2:53 PM

See also other documents in the category KROHNE Equipment: