KROHNE BM 702 A EN - Manual (Page 14)

3
INSTALLATION
14
BM 702 A
www.krohne.com 09/2009 - 4000643301 - MA BM 702 A R01 en
Installation
3.1 Notes on installation
3.2 Storage
• Store the device in a dry and dust-free location.
• Keep the converter out of the sunlight.
• Store the device in its original packing.
INFORMATION!
Inspect the cartons carefully for damage or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
Check the packing list to check if you received completely all that you ordered.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
WARNING!
Do not keep the device in a vertical position. This will damage the antenna and the device will not
measure correctly.
Figure 3-1: Storage conditions
1 When you put the device into storage, do not keep it in a vertical position.
2 Put the device on its side. We recommend that you use the packing in which it was delivered.
3 Storage temperature range: -40...+85°C / -40...+185°F
.book Page 14 Thursday, September 3, 2009 2:53 PM