KROHNE OPTISENS PAM 2080 EN - Manual (Page 9)

www.krohne.com 9
2 Description
2.1 Product
- - Digital converter for analysing and displaying measured parameters of KROHNE sensors.
- - Uninterrupted, secure data communication between MiniCVal components by means of IC bus
technology
- - 8 freely parameterisable channels for easy allocation of up to 8 sensors.
- - 4 analogue outputs 0/4 .. 20 mA for free allocation of channels.
- - 5 configurable relays, freely adjustable for thresholds (min./max.) or as fault sensors. Collective
notification for several channels or individually.
- - Full-graphic liquid crystal display (background illuminated) with clear-to-view, large display of
individual parameters.
- - Additionally, the most important information at a glance: calibration status, sensor condition, clean
function.
- - Data logger function with adjustable graphical hydrograph display, for improved on-site trend
detection and operating status diagnosis.
- - The following parameters are pre-configured factory-side and directly retrievable via the menu:
- - Semi-conductor
- - pH value (pH)
- - Redox (mV)
- - Ammoniac (NH3)
- - Ammonium (NH4 / NH4-N))
- - Nitrate (NO3 / NO3-N)
- - Nitrite (NO2 / NO2-N)
- - Water hardness (°GH Ca/Mg)
- - Sulfite (SO22-)
- - Sulfide (S2-)
- - Cyanide (CN-)
- - Chloride (Cl-)
- - Fluoride (F-)
- - Bromide (Br-)
- - Sodium (Na+)
- - Potassium (K+)
- - Oxygen (O2 dissolved)
- - Chlorine (Cl2 dissolved)
- - o-Phosphate (PO43-)
- - Lithium (Li+)
- - Refraction
- - Lead (Pb2+)