KROHNE OPTISENS PAM 2080 EN - Manual (Page 4)

www.krohne.com 4
1 Safety Information
1.1 General information
For your protection, please read and pay attention to all safety information prior to start-up of your
converter PAM2080.
Retain these instructions and all other information for future reference.
Utilisation other than that described here compromises the safety of persons and the entire measuring
equipment and is therefore impermissible.
The manufacturer will assume no liability for damage arising from improper or non-compliant utilisation
of the products.
DANGER!
Improper handling can lead to electric shock. “Hazardous voltages” representing a risk of electric shock
for humans may be present on non-insulated parts in the product’s casing. Therefore cut off the device’s
power supply prior to opening the connection cavity cover.
Assembly, electrical connection, start-up, operation and maintenance of the measuring equipment may
only be effected by trained personnel who must be authorised by the system operator for the activities
indicated. The trained personnel must have read and understood these operating instructions and must
follow the directions in these operating instructions.
Check that all connections are correct prior to starting up the measuring point as a whole. Make sure that
electrical cables and hose connections are not damaged.
Do not commission damaged products and protect these products from unintentional start-up. Label the
damaged product as defective.
If faults cannot be eliminated, you must remove the products from operation and protect them from
unintentional start-up. Repairs that are not described in these operating instructions must only be carried
out directly with the manufacturer or via the service department of KROHNE.