KROHNE OPTITEMP TRA-TCA Plus EN - Manual (Page 72)

7
TECHNICAL DATA
72
OPTITEMP TRA/TCA PLUS
www.krohne.com 01/2012 - 4000630301 - MA OPTITEMP TRA/TCA Plus R01
7.7 Permissible temperatures
7.7.1 Connection head
7.7.2 Unloaded thermowell and immersion tubes
The temperatures specified in the following tables are valid only for thermowells and immersion
tubes that do not project into flowing media or media under pressure. The maximum permissible
temperature is reduced under load.
Thermowells
Sheaths of measuring inserts made of mineral insulated cable
Temperature
transmitter Connection head Temperature range Maximum temperature
limiting component
Material Display
without Metal no -40...+100°C /
-40...+212°F
Gasket of connection head
cover and cable gland
without Plastic no -40...+80°C /
-40...+176°F
Connection head material
with Metal no -40...+85°C /
-40...+185°F
Temperature transmitter
with Plastic no -40...+80°C /
-40...+176°F
Connection head material
with Metal Yes -40...+70°C /
-40...+158°F
Display
DANGER!
If you are unsure as to whether the device can withstand the loads of the process when using an
insertion-type thermometer without thermowell, have a separate strength calculation done (e.g.
per DITTRICH or MURDOCK, ASME PTC 10.9-TW)! For further information contact the
manufacturer.
INFORMATION!
The manufacturer can provide an optional strength calculation for a fee.
Type of
thermowell Material Permissible temperature range
-T30 1.4571 / AISI 316 Ti -200...+600°C / -328...+1112°F
1.4404 / AISI 316 L -200...+600°C / -328...+1112°F
1.7335 / AISI F12 -200...+550°C / -328...+1022°F
1.0460 / C22.8 -200...+550°C / -328...+1022°F
All others 1.4571 / AISI 316 Ti -200...+600°C / -328...+1112°F
1.4404 / AISI 316 L -200...+600°C / -328...+1112°F
Type of sensor Cable jacket material Permissible temperature range
Pt100 RTD 1.4404 / AISI 316 L -200...+600°C / -328...+1112°F
Thermocouple Inconel ® 600 -40...+1100°C / -40...+1832°F
.backup.book Page 72 Tuesday, January 10, 2012 11:57 AM