KROHNE OPTITEMP TRA-TCA Plus EN - Manual (Page 26)

3
INSTALLATION
26
OPTITEMP TRA/TCA PLUS
www.krohne.com 01/2012 - 4000630301 - MA OPTITEMP TRA/TCA Plus R01
Installation
3.1 General notes on installation
3.2 Storage
3.3 Transport
DANGER!
For devices used in hazardous areas, additional safety notes apply; please refer to the Ex
documentation.
CAUTION!
Installation, assembly, start-up and maintenance may only be performed by appropriately
trained personnel. The regional occupational health and safety directives must always be
observed.
INFORMATION!
Inspect the cartons carefully for damages or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
Do a check of the packing list to make sure that you have all the elements given in the order.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
INFORMATION!
Assembly materials and tools are not part of the delivery. Use the assembly materials and tools
in compliance with the applicable occupational health and safety directives.
CAUTION!
Always store industrial thermometers for advanced requirements in a dry place protected from
dust. The permissible range for storage temperatures is -40...+70°C / -40...+176°F.
CAUTION!
Always transport industrial thermometers for advanced requirements in their original
packaging. Do not expose the devices to moisture or vibration during transport. The information
that applies to storage also applies to transport.
.backup.book Page 26 Tuesday, January 10, 2012 11:57 AM