KROHNE OPTITEMP TRA-TCA Plus EN - Manual (Page 69)

TECHNICAL DATA
7
69
OPTITEMP TRA/TCA PLUS
www.krohne.com 01/2012 - 4000630301 - MA OPTITEMP TRA/TCA Plus R01
TRA/TCA-TF56 with Ø 25 to 19 mm / 0.98 to 0.75"
7.6.4 Operating limits for one-piece, reduced bar stock thermowells
TRA/TCA-TS54 with Ø 16 to 13 mm / 0.63 to 0.51"
TRA/TCA-TS54 with Ø 22 to 13 mm / 0.87 to 0.51"
Process connection Material Insertion length p
max
at +20°C / +400°C or
+68°F / +752°F, air
p
max
at +20°C / +400°C or
+68°F / +752°F, water /
vapour
[mm] ["] [bar] [psi] [bar] [psi]
Flanges ASME 1",
1½", 2" 150 lb
1.4404 /
316 L
100 3.9 15.9 / 6.5 231 / 94 15.9 / 6.5 231 / 94
300 11.8 15.9 / 6.5 231 / 94 15.9 / 6.5 231 / 94
Flanges ASME 1",
1½", 2" 300 lb
100 3.9 41.4 / 24.3 600 / 352 41.4 / 24.3 600 / 352
300 11.8 41.4 / 24.3 600 / 352 41.4 / 24.3 600 / 352
Flanges ASME 1",
1½", 2" 600 lb
100 3.9 82.7 / 48.6 1199 / 705 82.7 / 48.6 1199 / 705
300 11.8 82.7 / 48.6 1199 / 705 82.7 / 48.6 1199 / 705
Flanges DN25, DN50
PN40
100 3.9 40.0 / 25.7 580 / 373 40.0 / 25.7 580 / 373
300 11.8 40.0 / 25.7 580 / 373 40.0 / 25.7 580 / 373
Process connection Material Insertion length p
max
at +20°C / +400°C or
+68°F / +752°F, air
p
max
at +20°C / +400°C or
+68°F / +752°F, water /
vapour
[mm] ["] [bar] [psi] [bar] [psi]
Thread G½", G¾",
½
" NPT, ¾" NPT
1.4571 /
316 Ti,
1.4404 /
316 L
100 3.9 100 / 100 1450 / 1450 100 / 100 1450 / 1450
300 11.8 47.0 / 59.0 681 / 855 100 / 100 1450 / 1450
Process connection Material Insertion length p
max
at +20°C / +400°C or
+68°F / +752°F, air
p
max
at +20°C / +400°C or
+68°F / +752°F, water /
vapour
[mm] ["] [bar] [psi] [bar] [psi]
Thread G½", G¾",
½
" NPT, ¾" NPT
1.4571 /
316 Ti,
1.4404 /
316 L
100 3.9 100 / 100 1450 / 1450 100 / 100 1450 / 1450
300 11.8 97.0 / 100 1406 / 1450 100 / 100 1450 / 1450
.backup.book Page 69 Tuesday, January 10, 2012 11:57 AM