KROHNE OPTITEMP TRA-TCA Plus EN - Manual (Page 57)

TECHNICAL DATA
7
57
OPTITEMP TRA/TCA PLUS
www.krohne.com 01/2012 - 4000630301 - MA OPTITEMP TRA/TCA Plus R01
Flange thermometer according to ASME Flange thermometer according to ASME Flange thermometer according to ASME Flange thermometer according to ASME
The length of the reduced tip "d" is always 65 mm / 2.56".
Figure 7-9: Flange thermometer according to ASME
1 TRA/TCA-TF55 (straight thermowell, one-piece, bar stock)
2 TRA/TCA-TF56 (conical thermowell, one-piece, bar stock)
3 TRA/TCA-TF57 (reduced thermowell, one-piece, bar stock)
TRA/TCA-TF55, -TF56, -TF57 with DIN- or ASME-Flange
ASME-Neck tube length
"a" Insertion length "b" Thermowell length
"c" Measuring insert
length
[mm] ["] [mm] ["] [mm] ["] [mm] ["]
152 6 100 3.9 157 6.2 331 13.0
150 5.9 207 8.1 381 15.0
200 7.9 257 10.1 431 17.0
250 9.8 307 12.1 481 18.9
300 11.8 357 14.1 531 20.9
350 13.8 407 16.0 581 22.9
.backup.book Page 57 Tuesday, January 10, 2012 11:57 AM