KROHNE OPTISONIC 6300 Quickstart EN - Manual (Page 4)

1
INSTALLATION
4
OPTISONIC 6300
www.krohne.com 07/2009 - 7.30959.24.00 - QS OPTISONIC 6300 R04 en
Installation
1.1 Intended use
The overall functionality of the clamp-on flowmeter is the continuous measurement of actual
volume flow, mass flow, flow speed, velocity of sound, gain, SNR and diagnosis value.
1.2 Scope of delivery
INFORMATION!
Check the packing list to check if you received completely all that you ordered.
INFORMATION!
Inspect the cartons carefully for damage or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
The device will arrive in two cartons. The square carton contains the converter. The rectangular
carton contains the transducer set.
Figure 1-1: Scope of delivery
1 Signal converter, wall version or field version
2 Quick Start
3 CD-ROM (including Handbook, Quick Start, Technical Datasheet, Support database, movie)
4 Factory calibration report
5 Sensor plus cover (stainless steel / XT version without cover)
6 Metal strap
7 Mineral coupling grease (standard versions) or high temperature contactgel Pyrogel
® (XT versions)
8 Signal cable plus connector cap (XT versions have a protection sleeve around the signal cable).
.book Page 4 Wednesday, August 19, 2009 8:37 AM