KROHNE OPTISONIC 6300 Quickstart EN - Manual (Page 24)

2
ELECTRICAL CONNECTIONS
24
OPTISONIC 6300
www.krohne.com 07/2009 - 7.30959.24.00 - QS OPTISONIC 6300 R04 en
2.3.3 Signal cable to converter
2.3.4 Laying electrical cables correctly
1 Lay the cable in a loop just before the housing.
2 Tighten the screw connection of the cable entry securely.
3 Never mount the housing with the cable entries facing upwards.
4 Seal cable entries that are not needed with a plug.
CAUTION!
Connect coax cables and follow indications up/down (1U 1D; 2U 2D; 3U 3D).
Figure 2-8: Connect signal cable (field version)
Figure 2-9: Connect signal cable (wall-mounted version)
Figure 2-10: Protect housing from dust and water
.book Page 24 Wednesday, August 19, 2009 8:37 AM