KEPCO EL Series Electronic Load Operator Manual P/N 243-1295 Firmware Version 1.232 (Unit Rev 0 or 1) - Manual (Page 62)

B-2
SERIES EL 063010
B.2 NUMERICAL VALUES AND DATA CONVENTIONS
The following conventions are used throughout this Appendix.
< > Items in these brackets are parameter abbreviations. Parameters may be numbers or text
Simple numbers (without a decimal point) from 0 - 255. Examples: 156, 0 or 1
Numeric Values with or without a decimal point. Examples: 0.0156, 15.6, 156 or 1.56E+3 (scientific
notation: digits with decimal point and exponent)
Text data indicating. For example, operating modes: CURRent, VOLTage, POWer, RESistance,
CONDuctance, SHORt
Boolean Data. Examples: 0, 1, OFF or ON. NOTE: If a command expecting a boolean argument is
sent with no argument, the argument is assumed to be 0 (e.g., INPut and INPut 0 are identical).
[ ] Optional keywords are shown in square brackets. For example [SOURce:]INPut:[STATe]
means SOURce and STATe: may be omitted thus the command is reduced to INP .
B.3 CALibrate:IPADdress COMMAND
CAL:IPAD
Syntax: Short Form: CAL:IPAD
Long Form: CALibrate:IPADdress
Where: = numbers from 0 to 255 comprising the IP Address
Description: Sets the IP address to be used during LAN communication.
B.4 CALibrate:IPADdress? QUERY
CAL:IPAD?
Syntax: Short Form: CAL:IPAD? Long Form: CALibrate:IPADdress?
Returns: = numbers from 0 to 255 comprising the IP Address
Description: Returns the IP Address used during LAN communication.
B.5 CALibrate:SUBNetmask COMMAND
CAL:SUBN
Syntax: Short Form: CAL:SUBN
Long Form: CALibrate:SUBNetmask
Where: = numbers from 0 to 255 comprising the Subnet Mask
Description: Sets the Subnet Mask to be used during LAN communication.
B.6 CALibrate:SUBNetmask? QUERY
CAL:SUBN?
Syntax: Short Form: CAL:SUBN? Long Form: CALibrate:SUBNetmask?
Returns: = numbers from 0 to 255 comprising the Subnet Mask
Description: Returns the Subnet Mask used during LAN communication.
SYST:PFM:STAT? B.110 SYST:REP, ? B.117, B.118
SYST:RANG:CURR, ? B.111, B.112 SYST:SERN? B.119
SYST:RANG:POW, ? B.113, B.114 SYST:SET? B.120
SYST:RANG:VOLT, ? B.115, B.116 SYST:VERS? B.121
TABLE B-1. SCPI SUBSYSTEM COMMAND/QUERY INDEX (CONTINUED)
COMMAND PAR. COMMAND PAR.