B.7 calibrate:gatewayadd command, B.8 calibrate:gatewayaddress? query, B.9 calibrate:gpib command – KEPCO EL Series Electronic Load Operator Manual P/N 243-1295 Firmware Version 3.12 (Unit Rev 2) User Manual
Page 63: B.10 calibrate:gpib? query, B.11 calibrate:dnsadd command, B.12 calibrate:dnsadd? query, B.13 debug:tree:display command, B.14 debug:tree:separator command, Calibrate:g, B.10

SERIES EL 070110
B-3
B.7
CALibrate:GATEwayadd COMMAND
CAL:GATE
Syntax:
Short Form: CAL:GATE
Long Form: CALibrate:GATEwayadd
Where: = numbers from 0 to 255 comprising the Gateway Address.
Description: Sets the Gateway Address to be used during LAN communication.
B.8
CALibrate:GATEwayaddress? QUERY
CAL:GATE?
Syntax:
Short Form: CAL:GATE?
Long Form: CALibrate:GATEwayaddress?
Returns:
Description: Returns the Gateway Address used during LAN communication.
B.9
CALibrate:GPIB COMMAND
CAL:GPIB
Syntax:
Short Form: CAL:GPIB
Long Form: CALibrate:GPIB
Where:
is 10.
Description: Sets the GPIB Address to be used during communication over the GPIB interface. After setting
the address, the EL Load must be power cycled (turned off, then on) in order for the new GPIB
address to take effect. Command is not valid from the GPIB interface.
B.10 CALibrate:GPIB? QUERY
CAL:GPIB?
Syntax:
Short Form: CAL:GPIB?
Long Form: CALibrate:GPIB?
Returns:
Description: Returns the GPIB Address used during communication over the GPIB interface. Command is
not valid from the GPIB interface.
B.11 CALibrate:DNSadd COMMAND
CAL:DNS
Syntax:
Short Form: CAL:DNS
Long Form: CALibrate:DNSadd
Where: = numbers from 0 to 255 comprising the DNS Address.
Description: Sets the Gateway Address to be used during LAN communication.
B.12 CALibrate:DNSadd? QUERY
CAL:DNS?
Syntax:
Short Form: CAL:DNS?
Long Form: CALibrate:DNSadd?
Returns:
Description: Returns the DNS Address used during LAN communication.
B.13 DEBug:TREE:DISPlay COMMAND
DEB:TREE:DISP
Syntax:
Short Form: DEB:TREE:DISP
Long Form: DEBug:TREE:DISPlay
Description: Produces text file showing the SCPI command set accessible to the user. The text file is
arranged in columns and can be imported into a spreadsheet application such as Excel for easy view-
ing. The column separator is determined by DEB:TREE:SEP command
B.14 DEBug:TREE:SEParator COMMAND
DEB:TREE:SEP
Syntax:
Short Form: DEB:TREE:SEP
Long Form: DEBug:TREE:SEParator
where
Description: Defines the column separator used when producing a text file of the command set using
DEB:TREE:DISP command.