GW Instek GFG-3015 - Manual (Page 47)

GFG-3015 p.43
Command Function Parameter Arguments
:SOURce:SWEep:SPACing Set the method of sweep <0>Linear
<1>LOG
:SOURce:SWEep:SPACing ? Check the method of
sweep None
:SOURce:TRIGger:RATe Set the value of trigger
rate Numeric data
:SOURce:TRIGger:RATe ? Check the value of
trigger rate None
:SOURce:TRIGger:STATe Set the trigger state <1>ON
<0>OFF
:SOURce:TRIGger:STATe ? Check the trigger state None
:SOURce:TRIGger:PHASe Set the value of trigger
phase Numeric data
:SOURce:TRIGger:PHASe ? Check the value of
trigger phase None
:SOURce:TRIGger:MODe Set the trigger mode <0>Single
<1>Mutiple
:SOURce:TRIGger:MODe ? Check the trigger mode None
:SOURce:TRIGger:SOURce Set the trigger source <0> Internal
<1> External
:SOURce:TRIGger:SOURce ? Check the trigger source None
:SOURce:TRIGger: SYM Set the value of trigger
SYM Numeric data
:SOURce:TRIGger: SYM ? Check the value of
trigger SYM None
:SOURce:COUNter:GATe Set the gate time of
counter <0>001sec
<1>01sec
<2>1sec
<3>10sec
:SOURce:COUNter:GATe ? Check the gate time of
counter None
:SOURce:COUNter:SOURce Set the counter source <0> Internal
<1> External
:SOURce:COUNter:SOURce ? Check the counter
source