GW Instek GFG-3015 - Manual (Page 43)

GFG-3015 p.39
:SOURce
:SWEep :WAVeform ?
:SYM ? :SPACing
1
(Linear )
Root node
Lower-lev el
nodes
Leaf node 2
(LOG )
The top level of the tree is the root level. A root node is located at the root level.
A root node and one or more lower-level nodes form a header path to the last
node called the leaf node.
The command header is configured by header path and leaf node. The below
Figure shows the command header for the leaf node indicated.
:SOURce:SWEep:SPACing ?
Root Node
Header Path
Command Header
Leaf Node
Parameter
If the command has parameters, the values have to be included. In this manual,
when we express the syntax of the command, the < > symbols are used for
enclosing the parameter type. For instance, the syntax of the command in the
following Figure includes the Boolean parameter type
NOTE: Do not include the <, >, or | symbols when entering the actual value for a
parameter.
:SOURce:SWEep:SPACing
Figure 3-4: Command Header w ith Parameter
Space
Parameter
T ype
Command Header with Parameter