GW Instek GSP-930 Quick start guide - Manual (Page 56)

GSP-930 Quick Start Guide
54
Tracking Generator (Optional)
Frequency Range 100 kHz to 3 GHz
Output Power -50 dBm to 0 dBm in 0.5 dB steps
Absolute Accuracy ± 0.5 dB @160 MHz, -10 dBm,
Source attenuation 10 dB,
20 to 30°C
Output Flatness Referenced to 160 MHz, -10 dBm
100 kHz to 2 GHz ± 1.5 dB
2 GHz to 3 GHz ± 2 dB
Output Level
Switching
Uncertainty ± 0.8 dB Referenced to -10 dBm
Harmonics < -30 dBc Typical, output level = -10
dBm
Reverse Power +30 dBm max.
Connector type N-type female
Impedance 50 ohm Nominal
Output VSWR < 1.6:1 300 kHz to 3 GHz, source
attenuation ≥ 12 dB
USB Power Sensor (Optional)
Type Average power sensor Model: PWS-06
Interface to Meter USB cable to GSP930 Front-Panel USB Host
Connector Type N-type male, 50 ohm nominal
Input VSWR 1.1: 1 Typical
1.3: 1 Max
Input Frequency 1 to 6200 MHz
Sensing Level -32 to +20 dBm
Max. Input Damage
Power ≥ 27 dBm