GW Instek GSP-930 Quick start guide - Manual (Page 28)

GSP-930 Quick Start Guide
26
Power Down
Description The GSP-930 has two methods to power down:
Normal and Forced Power Down.
The normal power down method will save the
system state and end any running processes.
The state is saved for the next time the
instrument is turned back on.
The forced power down method only does a
minimum state save.
Normal Power
Down Press the power button. The system will
automatically handle the power down
procedure in the following order:
 The system state is saved.
 Outstanding processes are closed in
sequence.
 The LCD backlight is turned off.
 The system enters standby mode (the
power key changes from orange to
blue).
Note
The process takes ~10 seconds.
Forced Power
Down Press and hold the power button for ~4
seconds until the system turns off and the
power button turns blue.
Note
The forced down mode might cause the GSP-
930 to perform a longer system check the next
time it is powered up.