beautypg.com

Power up – GW Instek GSP-930 Quick start guide User Manual

Page 27

background image

GETTING STARTED

25

Power UP

Steps

1. Insert the AC power cord into the power

socket.

2. The power button exterior will be lit blue to

indicate that the GSP-930 is in standby mode.

3. Press the power button to turn the GSP-930 on.

4. The power button will turn orange and the

GSP-930 will start to boot up.

Note

It takes approximately 1.5 minutes for the GSP-930
to fully startup.

See also other documents in the category GW Instek Equipment: