GW Instek GSP-930 Quick start guide - Manual (Page 38)

GSP-930 Quick Start Guide
36
3. Press
Frequency
>Center[F1] and enter 10MHz. This
is the output frequency of the REF out signal.
4. Press
Amplitude
>Ref Level[F1] and set the reference
level to 20dB.
5. Press
Span and enter a span of 1MHz. This
will set the start frequency to 9.5HZ and the
stop frequency to 10.5MHz.
Display
Reference
Level: 20dB
Center Frequency Span