GW Instek GSP-930 Quick start guide - Manual (Page 37)

BASIC OPERATION
35
B
ASIC OPERATION
The Basic Operation chapter in this Quick Start Guide only covers a
few basic operations: how to view a signal, how to use a marker to
make a measurement and how to setup the LXI interface. For
comprehensive operating instructions, please see the user manual
on the accompanying User Manual CD.
Viewing a Signal
Description This section will give a brief overview on how
to view signal from the rear panel REF out
terminal. Only the basic settings will be shown.
Operation 1. Press
Preset
. This will restore the factory default
settings. See page 45 for details.
2. Connect the REF out signal from the rear panel
to the RF Input on the front panel.
RF INPUT 50 W
+30dBm MAX.
MAX. DC ±50V