GW Instek GSP-930 Quick start guide - Manual (Page 31)

GETTING STARTED
29
Firmware Update
Description The GSP-930 allows the firmware to be
updated by end-users. Before using the GSP-
930, please check the GW Instek website or ask
your local distributor for the latest firmware.
System version Before updating the firmware, please check the
firmware version.
1. Press
System
>System Information[F1].
2. The firmware will be listed on the display.
Firmware: T. 1. 0. 0
3. Press any other key to exit out of the System
Information screen.
4. To upgrade the firmware, insert the new
firmware onto a USB flash drive or Micro SD
card and put the drive/ card into the
appropriate front panel port. The firmware
files should be located in a directory named
“gsp930”.
5. Press
System
>More 1/2[F7]>Upgrade[F3].