Edwards Signaling 108-DN Series - Manual (Page 5)

P/N 3100179 ISSUE 1 PAGE 5
Connection Object - Poll I/O Message Connection (Instance #2)
ATTR ACCESS DATA
ID RULES NAME TYPE VALUE
1 Get State USINT State Dependent
2 Get Instance type USINT 0x01
3 Get Xport class trigger USINT 0x82
4 Get Produced CONN. ID UINT 0x3FF for MACID 63
5 Get Consumed CONN. ID UINT 0x5FD for MACID 63
6 Get Initial COMM. Characteristics UINT 0x01
7 Get/Set Produced CONN. size UINT 0x03
8 Get/Set Consumed CONN. size UINT 0x03
9 Get/Set Expected packet rate UINT Application dependent
10 N/A N/A N/A Not used
11 N/A N/A N/A Not used
12 Get/Set Watchdog timeout action USINT (0x00 Default) 0, 1, 2
13 Get Produced path length UINT 0x0006
14 Get Produced path ARRAY OF USINT 20.04.24.01.30.03
15 Get Consumed path length UINT 0x0006
16 Get Consumed path ARRAY of USINT 20.04.24.01.30.03
Connection Object Services:
SERVICE SERVICE CODE PARAMETERS
Get Attribute Single 0x0E Attribute ID
Set Attribute Single 0x10 Attribute ID
ATTR ACCESS DATA
ID RULES NAME TYPE VALUE
1 Get State USINT 0x03
2 Get Instance type USINT 0x00
3 Get Xport class trigger USINT 0x83
4 Get Produced CONN. ID UINT 0x5FB for MACID 63
5 Get Consumed CONN. ID UINT 0x5FC for MACID 63
6 Get Initial COMM. Characteristics UINT 0x21
7 Get Produced CONN. size UINT 0x0007
8 Get Consumed CONN. size UINT 0x0007
9 Get/Set Expected packet rate UINT Application dependent
10 N/A N/A N/A Not used
11 N/A N/A N/A Not used
12 Get/Set Watchdog timeout action USINT 0x01 Default
13 Get Produced path length UINT 0x0000
14 Get Produced path ARRAY OF USINT
15 Get Consumed path length UINT 0x0000
16 Get Consumed path ARRAY of USINT
2.5 Connection Object (Class ID = 5).
There are two instances of the Connection object. Instance #1 is assigned to the Explicit Messaging Connection.
Instance #2 is assigned to the Polled I/O Connection. The following table shows the attributes and the pre-
defined values where applicable. No class attributes are supported.
Connection Object - Explicit Message Connection (Instance #1)