Edwards Signaling 108-DN Series - Manual (Page 2)

P/N 3100179 ISSUE 1 PAGE 2
1.3 Object Interfaces:
OBJECT Effect on Behavior
Identity (1) Message router
Message Router (2) Explicit message connection instance
Devicenet (3) Message router
Assembly (4) I/O connection or message router
Connection (5) Message router
1.4 Identification of I/O Assembly Interfaces:
Instance Number Type Name
1 Input/Output LEDs ON/OFF, LED diagnostics, and sounder control
1.5 Format of I/O Assembly data Attribute:
Input to the DeviceNet bus as a response to the poll command from master node.
Data Byte 0 value indicates the LEDs are OK or are burned out.
Data Byte 1 value indicates the LEDs were on or off when last poll command was received.
Data Byte 2 value indicates the current sounder module control value.
BYTE BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
0 DON'T DON'T DON'T DON'T DON'T LED 3 LED 2 LED 1
CARE CARE CARE CARE CARE 1 = REP 1 = REP 1 = REP
0 = OK 0 = OK 0 = OK
1 DON'T DON'T DON'T DON'T DON'T LED 3 LED 2 LED 1
CARE CARE CARE CARE CARE 1 = ON 1 = ON 1 = ON
0 = OFF 0 = OFF 0 = OFF
2 0 0 0 0 Sounder Tone Tone Tone
1 = ON MSB LSB
0 = OFF