Motion detection, Selecting an area to detect motion – Avigilon ACC Standard Client Version 4.12 User Manual
Page 68
Avigilon Control Center Standard Client User Guide
60
4. Click OK.
Motion Detection
In the Motion Detection dialog box, you can define specific motion detection areas and configure the
camera's sensitivity and threshold for motion.
Selecting an Area to Detect Motion
In the Motion Detection dialog box, you can define the green motion detection areas in the camera's field
of view. Motion detection is ignored in the areas not highlighted in green.
1. Right-click the camera in the System Explorer then select Setup to open the camera Setup dialog
box.
See
2. Click Motion Detection.
3. In the Motion Detection dialog box, use the tools above the image panel to define the green
motion detection area:
o
Set Area: select this button then draw green rectangles to define the motion detection
areas. You can draw multiple rectangles to create your motion detection area.
o
Clear Area: select this button and draw rectangles to erase sections from the motion
detection area.
o
Draw: select this button and manually draw motion detection areas with your mouse.
This tool allows you to be very specific and highlight unusual shapes.
o
Set All: click this button to highlight the entire image panel for motion detection.
o
Clear All: click this button to clear the image panel of motion detection areas.