Avigilon ACC Standard Client Version 4.12 - Manual (Page 102)

Avigilon Control Center Standard Client User Guide
94
6.
a. In the Preset column, select a preset from the drop down list.
b. In the Move Speed column, enter how fast you want the PTZ camera to move to this
preset. The speed is 80% by default.
c. In the View Time column, enter the amount of time you want the PTZ camera to stay at
this preset position. The view time is 10 seconds by default.
d. Repeat step 7 until all the presets for this tour have been added.
7. To remove a preset, select the preset then click .
8. To re-order a preset, select the preset then click or . The preset order only affects tours
that use Sequential mode.
9. Click OK to save the tour.
Listening to Audio in a View
Note: This feature is only available if there is an Audio Channel License installed.
If there is an audio input device linked to the camera, the Audio bar is displayed when you monitor the
camera's video. The Audio bar allows you to listen to what is occurring in the video.
Note: Some features are not displayed if the server does not have the required license, or if you do not
have the required user permissions.
To listen to the audio detected by the audio input device, perform any of the following:
 In the lower-right corner of the image panel, click to mute or activate the audio.
 Move the slider to change the volume.
Figure A.
Audio bar