AccuMac AM8060 - Manual (Page 9)

AM8060 Precision Thermometer
User’s Guide
8/43
probe/probes and temperature difference. This information is
shown in 4 lines, as seen below:
Line 1 is the instrument interface status, including USB flash
drive, wireless communication status and USB to computer
interface status. If the “Udr”is shown in Line 1, a USB flash
drive is connected to the USB host interface; if “ZB-xx (where
“xx” are numbers) displays on Line 1 as shown above, it means
the Zigbee wireless data capturing is working; if the display
shows“USB”on Line 1, then AM8060 is connected via its
USB client interface.
Line 2, which is indicated with ‘t1’, shows the measured
temperature of Probe 1 (S1). The“SPRT” at the end of the
Line 2 tells the type of probe of Probe 1 (S1). The AM8060
supports two types of probes. “SPRT” indicates a 25Ω or 100 Ω
standard platinum resistance thermometers. “IPRT” indicates a
100Ω industrial platinum resistance thermometer. The “C”
shown at the end of Line 2 indicates that the temperature is in
Celsius.
Line 3, which is indicated with ‘t2’, shows the measured
temperature of Probe 2 (S2).