AccuMac AM8060 - Manual (Page 3)

AM8060 Precision Thermometer
User’s Guide
2/43
Important Notice ---- Warning

Check the position of the “Measurement/Calibration
Switch” on the rear panel before turning on the device.
Please refer to Figure 2. The switch must be at the
measurement (left) position. Loss of calibration data will
occur if the switch is at the calibration (CAL) position
when the instrument is used in measurement application.
 The instrument is calibrated before shipment. Only
qualified calibration agencies should use the switch when
the instrument is under calibration. Please refer to 5.
Instrument Calibration And Accuracy Adjustments