AccuMac AM8060 - Manual (Page 13)

AM8060 Precision Thermometer
User’s Guide
12/43
4.5.2.2 Press or key to move the selection line with the
“>” symbol to “Sensor 1 Setting”. Press key to enter
the Sensor 1 setting adjustment program as shown
below. The probe type can either be “IPRT” or “SPRT”.
Users can select either one by moving the “>” to the
sensor type, and then press
key. Users can exit this
selection by pressing MENU key. The figure below shows
that SPRT is selected.
4.5.2.3 Press key to go to the parameter adjustment menu: